BILLETS WITH ROUND CORNERS
Range 1: 35×35 ÷ 100×100 mm
Range 2: 110×110 ÷ 280×280 mm
ROUND BARS
Range 1: Ø12 ÷ Ø19 mm
Range 2: Ø20 ÷ Ø120 mm
Range 3: Ø125 ÷ Ø300(320) mm
On production schedule, we can supply the bars with normal, precision and gauged tolerances, according the the following table: link.
Upon request, the bars can also be supplied with a turned surface, according to the following table: link.
ROUND BARS FORGED
Range 1: (Ø100 ÷ Ø300 mm)
Range 2: > Ø300 ÷ 1000 mm (Tolerances)
SQUARE BARS
Range 1: 18×18 ÷ 28×28 mm
Range 2: 30×30 ÷ 110×110 mm (Tolerances)
Range 3: 120×120 ÷ 400×400 mm
FLAT BARS
Range 1: 14×10 ÷ 18×14 mm
Range 2: 20×5 ÷ 28×20 mm
Range 3: 30×5 ÷ 52×42 mm (Tolerances)
Range 4: 40×20 ÷ 150×50 mm
Range 5: 140×10 ÷ 300×50 mm
Flat bars can be supplied with sharp edges (EN 10058) or with round edges according to the main tolerance norms
(EN 10092-1 and EN 10092-2) (Tolerances)
In addition to the norms above, we can supply the bars with round edges with R=25mm, in the following range:
thickness: 20 – 22 – 25 – 30 – 35 mm
Width: 60 ÷ 100 mm
Length: bars 3 ÷ 12 M.
In addition: A special series for frame side members of trucks, in vanadium steel like 1.5217, with Rs=56 Kg/mm2 min.
Width: 100÷150 mm
Thickness: 7 ÷ 15 mm
SPECIAL PROFILES
1) Extruded bars with a maximum width of 50mm and a maximum weight of 5,5 kg/meter;
2) Extruded bars in lengths up to 15 meters, in full or hollow bars, whose section can be inscribed inside a circle with diameter maximum ~200mm.
